TJ1200 Digital Spin Coater

Digital Spin Coater is used in the process of manufacturing semiconductor, IC, and laser brand name produce, The equipment is used to daub sensitive emulsion on substrates such as silicon chip, photomask, sheet glass, ceramic chip. Use centrifugal force from tail-wagging to swing the excrescent sensitive emulsion which is dripped on the substrate. Then the glue film can be formed at the action of centrifugal force and tension on the surface of sensitive emulsion. High efficiency and convenient operation. Track speed and track time can be adjusted separately.

Digital Spin Coater TJ900

This product is suitable for glue and uniform rejection process, it use the power controllers, the speed and the time can be adjusted through setting key, start fast, speed stability, high time accurate, and can work long time continuous stability. This machine can effectively control the thickness of the glue, and have good uniformity and consistency, high stability, convenient operation, high cost-effective, and can be widely used in the scientific research and production.

Digital Spin Coater TJ800

This product is suitable for glue and uniform rejection process, it use the power controllers, the speed and the time can be adjusted through setting key, start fast, speed stability, high time accurate, and can work long time continuous stability. This machine can effectively control the thickness of the glue, and have good uniformity and consistency, high stability, convenient operation, high cost-effective, and can be widely used in the scientific research and production.

Chemical Tinning Machine PCB350

Summary:
This equipment is used to tin on the surface of PCB and enhance welding, at the same time it can protect PCB to not be etching.
Process:
After electroplating and solidifying copper, put the copper board into tinning machine, there are 2 purposes:
1. tin on the PCB and holes to finish plating PCB; 2. enhance linking stably and welding effect after tinning.

PCB Hole Metalizing Plating System PCB2030 (Copperize)

Metal and plating the through-hole on double-size for multilayer board to realize multi-layer metal connection.

Spray Etching Machine PM142

Main Technical Parameters:
1. max PCB developing size: 500*300mm
2. developing way: double size spray
3. speed: 90-120 seconds
4. liquor capacity: 8-10L
5. head: 8

PCB Hole Metalizing Plating System PCB2010 (Copperize)

1. Plating solution micro-circulation system: Built-in two sets of porous foam tubes and quiet air pump to make plating solution micro-circulation to improve the quality of plating;
2. Plating PCB moves towards and backwards regularly: Control electroplating speed can be adjusted.
3. Integrated structure
4. sealed design ensure no plating solution pollution, plating quality is good.

Spray Etching Machine PM141

This Spray Etching Machine extends the application about etch technology. It is widely used in laboratory and small-batch former manufacture. Develop, cleaning, etching can be finished by one equipment. It means more convenient. The particular spray technology can save the developing agent and the developing time greatly.

Developer PX500

USAGE:
Developer is used for circuit board, welding developing after exposure.

Developer PX300

USAGE:
Developer is used for circuit board, welding developing after exposure.

Torch UV Exposure I

UV exposure adopts design from German and persuasions for quality, especially for lab in school, research institutes, company develop department, electronic lovers for small production. Suit for all material sensitive to the ultraviolet light, such as PCB, mark board, mask. The machine co figurate with time counter, can adjust the time easily. This machine is small size, perfect appearance, can meet your need to do samples quickly.

Torch UV Exposure II

UV exposure adopts design from German and persuasions for quality, especially for lab in school, research institutes, company develop department, electronic lovers for small production. Suit for all material sensitive to the ultraviolet light, such as PCB, mark board, mask. The machine co figurate with time counter, can adjust the time easily. This machine is small size, perfect appearance, can meet your need to do samples quickly.

Exposure Machine UV260D

UV260D adopts the high-tech UV exposure machine from Germany. It can achieve high accuracy exposure of PCB, it also can accomplish the accurate welding tray of PCB and the clear pattern of lead wire.

NC Laminating Machine TF350

TF350 NC Laminating Machine uses a very wide range, particularly suitable for the dry film hot compress for PCB production process, the machine functions practical, can be double-sides laminating and single-side laminating.

NC Laminating Machine TF650

TF650 NC Laminating Machine uses a very wide range, particularly suitable for the dry film hot compress for PCB production process, the machine functions practical, can be double-sides laminating and single-side laminating.

Brusher PS600

The machine is single-size polishing treatment machine, is the necessary machine for PCB production process. It is used for polishing, cleaning, and trying treatment, suitable for oil and oxide layer; The machine generated with board input, brushing, water washing, board output function.

Brusher PS400

The machine is used for taking off oil and oxide layer; mainly for PCB board polishing treatment, also for stainless steel, aluminium plate and cooper plate. The process includes board input, brushing, water washing, board output.

Mini Drilling Device PCB-3

PCB drilling machine, high speed SMT drilling machine, high speed PCB drilling machine, PCB high speed drilling machine, drilling machine.

Cutter HS1

1. The German steel long life blades, blade length of 30 cm, easy to cut the thickness of just jamming a variety of PCB, FPC, PP, various thin metal plate;
2. Streamlined appearance and ergonomic design;
3. Configure levels on bit functions, you can easily cut the fixed shape of the PCB board;
4. The maximum cutting width of 300mm, maximum cutting thickness of 3mm, cutting strength: 40KG;

Cutter HS2

1. the German steel long life blades, blade length of 30 cm, easy to cut the thickness of just jamming a variety of PCB, FPC, PP, various thin metal plate;
2. streamlined appearance and ergonomic design;
3. configure levels on bit functions, you can easily cut the fixed shape of the PCB board;
4. the maximum cutting width of 300mm, maximum cutting thickness of 3mm, cutting strength: 40KG;