• Technical Data Sheet

Introduction:

TB980C has a synchronal feeding system. Synchronal chain with claws design, no noise, smooth conveying. Control system: Industry computer with signal processing by hearing is reliable and stable. Far IR preheating system to prevent the temperature going down. New type boost spraying system of the welding flux reduces the dosage of the flux. Conveying system: imported motor for driving with overload protection device. The width of the substrate is adjusted automatically by computer.

Remark:

Technology parameter of TB980C:

Preheating Section (Infrared+ hot air): 4kW * 2

Preheating temperature: Room-temperature ~180

Preheating control mode: PID Mode

Power of tin stove heating tube: 2kW * 8

Jointing control mode: PID Mode

Wave crest motor: imported high temperature resistant motor

Soldering tin capability: Max.500kg (Sn63Pb37); 430Kg (Sn100%)

PCB width: Max.250mm

PCB Transmission speed: 0.5~1.8m/min

Transmission motor power: 90W

Gross power: 36kW

Working power: 18kW

Power supply: Three-phase, 380V, 50Hz

Air supply: above 5Mpa

Gas pressure of spra: 0.25Mpa~0.4Mpa

Spray gun driving type: need a spraying machine outside

Cooling system:wind cooling system.

Dimension (L*W*H) 4120*1280*1630

Weight: about 1050kg