• Technical Data Sheet

Introduction:

Parameter

Heating -zones	8 heating-zones, 16 heating, 2 cooling
Heating length	2900mm 2900mm
controlling area	room temperature to 360℃
Controlling accuracy	±1℃
difference in temperature	±2℃
calefactive time	≤20min
cooling way	compulsion cooling air (can choose water cooling)
PCB size	50-400mm; can be made to order (max 500mm)
PCB transportation height	900±20mm
transportation way	Chain and net tape to transport
transportation direction	L-R (can choose R-L)
transportation speed	0-1800mm/min
Chain’s wide range	50-400mm; Can be made to order
net tape width	520mm
power off protection	UPS for Conveyor & PC
power supply	AC 380V 50Hz
abnormity alarm	temperature abnormity alarm
normal/start power	15/65 kW
mm dimension	5650L*1360W*1600H
net Weight	2130kg
Nitrogen protection	standard configuration (should choose O2 analysis setting)
density	400-1000/PPM
cost of Nitrogen	20-30m3/h

Mainly configuration listing

controlling system	SIEMENS? CPV, SIMA temperature controlling panel. (Also can choose the Torch researched )
software	researched by Torch
computer	above P4 of HP and Levovo's configuration, 15 inch LED screen.
without-electricity switch	French Schneider
solid-state relay	Taiwan fotek (can choose Korea Deke)
intermediate relay	Japanese Omron
fuse	CHNT
single without-electricity operates	French Schneider
transportation motor	PANASONIC
circulation? motor	Taiwan Sanyue
heater	LONG SHENQ ELECTRONIC, shelf life is 100 thousand hours.
transportation motor	Korea SPG
UPS	Taiwan APCUPS
transducer	Taiwan Motor
wire	high temperature international standard wire
temperature test sense organ and connector	OMEGA USA OMEGA

R series specialty

1. Heating system: Our patent heating system. temperature warm up quickly and can keep very stable, High effective can save Electronic. It is adopted in jointing the PCB and CSP component.

2. Wind wheel is our patent design, that is assure to supply stable wind pressure.

Every heating room is controlled separate circle system. Heating both upper and lower part can make the temperature stable, accurency and keep in a high level.

3. The oven cover adopts electromotion motor system that can make it safe and clear.

Automatic follow system of the PCB panel and alarm when the fan and temperature is abnormal. Trouble diagnoses and sound-light alarm.

Warm up quickly, from room temperature to work temperature only need 20min.

Imported high quality motor which can bear high temperature and high speed. The wind is calm and the sound is small.

B: Smooth and safe transmission system:

The chain and net tape work at the same speed and be controlled by the computer. The accuracy is ±1.5%.

The Guideway is made from good aluminum alloy, It has high hardness and can’t transfiguration easily.

Add oil is controlled by the computer. That can make the transportation smoothly and longer the using life of the guideway and chain.

Add the fresh air to the different room continually, that can make the air pressure kept at the same level. So the heat content is high.

Reclaim the Nitrogen and rosin system can take out the O2 and add the Nitrogen quickly.

Control the soldering flux and Nitrogen's direction and flux, and nitrogen is airproof and can reclaim, that can save the cost.

Soldering flux’s filtration net is designed a drawer, which can be clean easily.

Pump Cooling system.

The cooling speed is 6-8℃/sec, the tin ball is bright and smooth, PCB 's temperature is below 70℃ when it came out.

Strong model software controlling system.

The switch can delay turn off time to protect the machine to make the temperature to cool down slowly. That can prevent the component on the tape to transfiguration.

When the power off, this machine can still transport PCB board out and can make no damage to it.

The machine can count the PCB’s quantity when it works.

Controlling the room by PID indepently, can check the temperature and analysis the data, then transfer the result? to type.

Transportation system is controlling by computer so the transportation speed and fan speed can adjust at any rate.

Auto supervision to show the working condition and test every connector of the equipment.

Four protection system.

Creepage protection: Apply the CHNT creepage to assure the safety of the person and equipment.

Auto Daley protection: For installing UPS, it can protect the controlling system and PCB when the power off.

Cover protection: When the temperature gets high, we can open the cover quickly to prevent the damage to Equipment and PCB.

Sound-light alarm function: It will alarm when there is trouble, and the trouble can be recorded for maintenance.