1. Home
  2. Products
  3. SMT Equipments
  4. Conveyor reflow oven
  5. Full Hot Air Lead-free Reflow Oven With Seven Heating-zones TN370C

Full Hot Air Lead-free Reflow Oven With Seven Heating-zones TN370C

  • Product Description

Protection system: TN370C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.

  • Technical Data Sheet
The selling point of TN series:

1. Chanel reflow oven with the thickness of 150mm.

2. Use 24 chanel modular design reflow oven hardware temperature control system.

3. The only industry can achieve custom fuinction reflow oven software system.

4. The only industry have remote control reflow oven software system.

5. Equipped with top brand HP OR Lenovo computer, such as optional industy computer according to customer requirment.

Product instruction of TN370C:

Heating system: TN370C adopts high effective and energy-saving nickel-chromium heating tube. Advanced technology and Long life. And TORCH self-developed hot-air circling system features warm up quickly, which can make PCB component be heated evenly.

Protection system: TN370C uses SSR solid relay (450V) that has large power and pressure prevention to non-contact output, safe and reliable. It can monitor the change of temperature and heat number in furnace chamber with the functions fuzzy control and data collection. Then control the heating component with the least pulse and response quickly. TO keeps the Temperature control accuracy, but the equipment can not be damage for the high current and high voltage. And each room fits a safety pipe which is high temperature and high pressure resistant function so that the whole system can run safely and calmly.

Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response to the change of outside to balance the temperature. The whole system has a modularized design. It is convenient to maintenance and disassembles

Outer shell and furnace body of TN370C can be opened wholly and automatically. It is convenient to clean and maintain it.

Main features for TN370C:

1. Intuitional welding control: TN370C adopts advanced furnace temperature collection system. It can test temperature curve and temperature in furnace hearth. The temperature curve can be recorded or printed at the same time.

2. Smooth and safe transmission system: Drive system adopts a high quality conversion motor and conversion system. It also has a closed-loop governor and Turbine speed reducing box of 1:100 to keep running smoothly. Speed:01600mm/min.

3. Stable and safe electric control system: Delay switch protection. After power off, temperature drops evenly so that can prevent damage to transmission component and heater.

4. Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different PCB plates and components.

ModelTN370C
Heating part parameter
Heating zone7 heating zones (7 upper, 7 cover)+1 cooling zone
Heating methodFull forced Hot air heating
Warm-up time25min
Cooling zone1 zone, (1up/1 below)
Cooling methodtransverse flow vortex centrifuge blower
Built-in automatic relay heating systemTo prevent over-pressure damage controller or motor when start up and to prevent component damage when welding.
Transmission parameter
PCB Board width≤ 300mm
PCB conveyor Height900±20mm
conveyor directionL→R or R--L
Conveyor MaterialStainless steel
Chain-driven Mesh belt conveyorNet belt and chain-driven transmission
Mesh belt width300mm
Conveyor speed0-1600mm/min adjustable
Control part parameter
Power supply380V (3 ph, 4 wires) 50/60Hz
Max Power38kW
Normal working power21kW
Warm-up time≤ 30min
Control systemPLC+ Torch module temp control system+ IPC
Range of temperature controlRoom Temperature-360 ℃
Temperature controlAdvanced Intelligent micro computer PID temperature control automatically in each zone + SSR non-contact output
Precision of temperature control± 2℃
Temperature distributing error± 2℃
Machine Body Parameter
Net Weight750kg
Dimension (L×W×H) (mm)3100×900×1390mm
Welcome to send your message to us
*Email
*Content
Product Name
Your Name
Company
Tel/Fax.
Msn/ Skype